AR-15/M-16 Parts and Accessories
LULA Mag
Loader/Unloader
By maglula Ltd.
The LULA™ is a military quality personal
magazine Loader/UnLoader Accessory.
It facilitates both loading of loose rounds into a magazine and unloading
them out of the magazine.
It does so fast, safely, comfortably and painlessly.
For AR-15 and M-16
$22.95
BUY
BATTLEGRIP
Battery Storage SystemA pistol grip designed for the M4/M16/AR-15 series rifles with features previously unavailable in a combat-quality grip. Along with superior ergonomic form that provides substantial shooter comfort over any other grip, BATTLEGRIP has the ability to internally store two Aimpoint-type batteries in addition to two AA or 123 series Lithium batteries all in a water, dust, and rattle-resistant cavity sealed by an easy-to-access cover.
The batteries contained inside of the BATTLEGRIP's indestructible Nylon/glass-fill housing are for immediate use and can be removed in a second for installation in night vision, IR, visible LASER aimers, high-intensity white light, and Aimpoint/Eotech-type LED sights. Other battery storage combinations can be achieved using supplied spacers.
$29.95
BATTLEGRIP
Textured GripBATTLEGRIP with textured surface for enhanced grip.
$31.95
Mag Cinch Mag
PouchBy Eagle Industries
The MAG CINCH™ System (patent pending) allows you to carry two magazines with your rifle, but when you have a need for multiple dual-magazine units, you need our special magazine pouches. These pouches were specifically designed to carry Mag Cinch units and are made by Eagle Industries. Why carry just two magazines when you can carry six or more? And you won't waste time searching for your second dual magazine unit! With this magazine pouch, all that you need to do is reach to your side, open the flap, and pull out the unit.
Available for 9mm and AR mags.
Single pouch holds 2 magazines as 1 Mag Cinch units. Double pouch holds 4
magazines as 2 Mag Cinch units.
$29.95
BUY
AR-15 Featherweight Bipod
By Advanced Technology
Weighs 8oz. One-second extend/retract. Unique "Snap-N-Lock" button to fold forward or rearward. No gunsmithing to install. All hardware included. Swivels 60°. All bipods allow use of a sling. Non-slip rubber feet. Proudly made in the USA. Unconditional lifetime warranty. Sling swivel stud hardware included.
Swivel Model
Non-Swivel Model
$39.99
AR-15 Sling AdapterBy Advanced Technology
Fits round or mil-spec hand guards. Swivel included.
$7.99
BUY
AR-15 Magazine
CoverBy Advanced Technology
Fits .223. See-thru, clear, rubber cover slips on mag. Keeps ammo dry and dust free. Also protects mag feed lips. Easily slips on and off magazine.
Package of 4.
$7.99
BUY
Ironstone
Sportsman Model AR-15 StockThe Ironstone
butt stock is an ergonomic designed replacement for a conventional
butt stock. It has adjustment for length of pull, weight, drop, and cant,
which may easily and readily be changed in the field during use. It mounts
on a rifle without modification to the rifle receiver and which does not
require modification of the rifle’s charging handle.
Beneficial effects of the Ironstonebutt stock
include easy mounting of the rifle, elimination of head, neck, and shoulder
strain, and quick and easy fitting of the rifle butt stock to any shooter
and any shooting position. It provides an ergonomic adjustable butt stock,
which will significantly improve a shooter’s marksmanship.
$275.00
BUY
Extra wide and long for easier operating of your charging handle with low mounted scopes.
NEW REDUCED PRICE!
$19.99
$9.99
BUY
Checkered, easier to operate with your trigger finger. Replaces the standard magazine catch. A replacement spring is included.
NEW REDUCED PRICE!
$29.99
$14.99
BUY
The
MagCinch ToolDsigned with the avid AR shooter in mind, incorporates several needs into one compact package, and weighs less than 2 rounds of ammo! The metal insert is made of a high carbon stainless, heat treated to a Rockwell of 48-50.
- Front sight adjustment tool.
- MagCinch strap tightening device to assist you in getting your MagCinch units installed correctly.
- Bolt face cleaning tool. This tool is the exact size of the 5.56mm/.223 bolt face. Lets you remove any built up residue and fouling.
- Two disassembly punches. One is large enough for the take down pin and the other is for the pins in your lower receiver. Using these tools will make sure you don't mar the finish of your favorite rifle.
- A tool that can be used in place of a Phillips screwdriver or can be used as a scraper.
- Lanyard loop, which allows you to tie your tool to you web gear or tool bag so you don't lose it.
The MagCinch Tool is patent pending.
BUY
AR-15
Upgrade KitIncludes 1 each of following:
Accu Wedge
Combo Wrench
Green Magazine Follower
Defender
Buffer Technologies Buffer
Extended Charging Handle Latch
Gapper
$39.99
AR-15/M-16 Free Float Forend,
Grip ComboHogue applied their OverMolded technology to AR-15, M-16 style rifles producing the ultimate grip and forend combination. The O.M. AR-15 grip is specifically designed to retain the important lines and aesthetics of the AR, while at the same time providing a comfortable rubber grip with finger grooves and palm swells. The forend is a unique two-piece, free-floating rubber OverMolded™ Aluminum forend tube. Free-floating your AR barrel gives maximum accuracy by eliminating all hand guard forces on the barrel. The rubber OverMolding gives a super comfortable, non-slip grasping area that insulates your hand from the heat produced during rapid fire, or the cold of extreme climates. The two-piece design installs easily on any AR/M-16 style rifle.
Carbine and Rifle Lengths.
$99.99
AR-15/M-16 OverMolded Free Float ForendHogue applied their OverMolded technology to AR-15, M-16 style rifles producing the ultimate free float forend. The forend is a unique two-piece, free-floating rubber OverMolded™ Aluminum forend tube. Free-floating your AR barrel gives maximum accuracy by eliminating all hand guard forces on the barrel. The rubber OverMolding gives a super comfortable, non-slip grasping area that insulates your hand from the heat produced during rapid fire, or the cold of extreme climates. The two-piece design installs easily on any AR/M-16 style rifle.
Carbine and Rifle Lengths.
$89.99
AR-15/M-16 Rubber GripThe OverMolded AR-15 grip is specifically designed to retain the important lines and aesthetics of the AR, while at the same time providing a comfortable rubber grip with finger grooves and palm swells.
$19.99
(Picture not available)
AR-15/1911 Auto Combo Wrench
Each
5 Pack
$14.99
AR15/M16 Green FollowersThese are a must have part for reliable magazine operation and cartridge feeding.
5 Pack
10 pack
20 pack
30 pack
50 pack
$9.95
$14.99
$27.99
$39.99
$59.99
ACCU - Wedgeby Z-M Performance Systems
The ACCU - Wedge™ adds stability and eliminates any chance of unwanted noise from this particular weak point in an otherwise fine weapon. This is perhaps the least expensive of all the AR-15's many potential accessories, yet it adds immeasurably to the security and surety of the most basic element of any weapon... its assembly!
This well-designed component fits between the receiver and the trigger assembly housing and completely eliminates the play and "rattle" which is all too often associated with this otherwise modern rifle.
BUY
D-FenderEnds AR-15/M-16 Extraction Problems!
Simply install this small hi-tech composite "D" ring and increase the force of the extractor spring by Four Times! Yes, it's a simple device, but if extraction is your problem, this is the simplest, and cheapest, solution you will find in the marketplace today. Extractor and Spring are not included.
The D-Fender works with the following weapons: AR-15/M-16, AR-18/AR-180, Dawoo 5.56, Dawoo 7.62x39, SA-80, Steyr Aug & Bushmaster M-17 Bullpup!
BUY
The
Gapper ™Designed to fill that void in front of the Pistol Grip up to the rear of the trigger guard. Made with solvent resistant Polyurethane. Clips in easily. A friction fit holds it in place. No more banged up knuckles.
BUY
MAG
CINCH™ SystemThe MAG CINCH units hold two magazines together with rock solid strength to ensure that they both operate as one unit, as if they were made from one solid piece of steel. The MAG CINCH™ units will not mar, scratch or deform your magazines. They are designed specifically to grasp magazines without damaging them in any way.
BUY
Uses leverage as an advantage. By holding the hammer towards the "head", it provides a smooth and lighter trigger pull, as little as 1 lb.
The JARD trigger system is a single stage trigger that is fully adjustable to meet everyone's needs. It requires no modifications to your gun and fits in any AR style rifle.
Available to fit rifles with either the .154" (military and current aftermarket) or the .171" (current Colt) diameter hammer and trigger pins. Measure your pins and select the correct kit.
BUY
JARD Trigger Spring Kits
1-1/2#, 2#, 3#, 4#, 4-1/2#, 5#
BUY
This is the practical way to release your magazine from either your left or right hand. Ideal for quick reloads while keeping your rifle on target.
$97.50
BUY