Buffer Technolgies Products
(click image for 201KB
video)
Magloader(patent pending)
MagLoader is a magazine loader for pistols from .32 through
.45 ACP in both double and single stack magazines.
Just slip your thumb into MagLoader and depress each round as you load
another round. MagLoader is made of nylon to last, and has no moving parts
to break or wear.
$4.50
BUY
Mag Cinch Mag PouchBy Eagle Industries
The MAG CINCH™ System (patent pending) allows you to carry two magazines with your rifle, but when you have a need for multiple dual-magazine units, you need our special magazine pouches. These pouches were specifically designed to carry Mag Cinch units and are made by Eagle Industries. Why carry just two magazines when you can carry six or more? And you won't waste time searching for your second dual magazine unit! With this magazine pouch, all that you need to do is reach to your side, open the flap, and pull out the unit.
Available for 9mm and AR mags.
Single pouch holds 2 magazines as 1 Mag Cinch units. Double pouch holds 4
magazines as 2 Mag Cinch units.
$29.95
BUY
Beretta 92/96
Recoil BufferOur buffer for the Beretta 92/96 is a departure from our original line of buffers. It was not possible to place a cushioning buffer between the slide and frame, as with our other recoil buffers, without making our own guide rod.
The guide rod and buffer will fit both the 92 and 96 series of Beretta handguns.
BUY
Seidler
Compensator Set9mmP for model 17 – 6" barrel. Requires no modification to gun or gunsmithing. Reduces felt recoil and muzzle movement.
Kit Includes: Compensator , Spring-guide Rod, and Spring
(US-Pat. No. 4.930.397)
BUY
The JetloaderPrecision SPRING LOADED revolver speed-loading device. Being spring-loaded, the ‘Jetloader’ is claimed to be one of the fastest and truest speed loaders in existence. Shells can be loaded in any position up to vertical. A hidden trigger rams the shells home into the chambers when activated.
L – Model will fit:
S&W models 686, 586
Ruger GP 100 Series - all models
K – Model will fit:
S&W models 10, 13, 14, 15, 19, 64, 65LS, 65, 66, 67 ...
Taurus models 80, 82, 83, 86, 65, 66, 66CP, 669CP, 689 ...
F – Model will fit:
S&W models 36, 36LS, 37, 38, 49, 60, 60LS, 442, 337
Ruger SP 101 Series - .38 Special and .357 Magnum
BUY
The
MagCinch ToolDsigned with the avid AR shooter in mind, incorporates several needs into one compact package, and weighs less than 2 rounds of ammo! The metal insert is made of a high carbon stainless, heat treated to a Rockwell of 48-50.
- Front sight adjustment tool.
- MagCinch strap tightening device to assist you in getting your MagCinch units installed correctly.
- Bolt face cleaning tool. This tool is the exact size of the 5.56mm/.223 bolt face. Lets you remove any built up residue and fouling.
- Two disassembly punches. One is large enough for the take down pin and the other is for the pins in your lower receiver. Using these tools will make sure you don't mar the finish of your favorite rifle.
- A tool that can be used in place of a Phillips screwdriver or can be used as a scraper.
- Lanyard loop, which allows you to tie your tool to you web gear or tool bag so you don't lose it.
The MagCinch Tool is patent pending.
BUY
The CZ recoil buffer will eliminate the metal to metal impact of the slide on the receiver each time the weapon is fired. You will extend the service life of your pistol as well as have reduced felt recoil by installing one in your weapon. Installation is easy and requires no special tools or modification to your gun.
BUY
Reduces recoil impulse and prolongs the service life of your firearm. This is accomplished by stopping the bolt from directly contacting the receiver. This abrupt transfer of energy can affect zero on scoped rifles. Installation is a breeze; requires no modification to the firearm.
BUY
Designed to fill that void in front of the Pistol Grip up to the rear of the trigger guard. Made with solvent resistant Polyurethane. Clips in easily. A friction fit holds it in place. No more banged up knuckles.
BUY
The MAG CINCH units hold two magazines together with rock solid strength to ensure that they both operate as one unit, as if they were made from one solid piece of steel. The MAG CINCH™ units will not mar, scratch or deform your magazines. They are designed specifically to grasp magazines without damaging them in any way.
BUY
The Buffer Technologies Recoil Buffer for the Glock pistol eliminates the metal slide from impacting the polymer frame. This repeated impact batters the frame where the two parts come into contact. Stopping this battering is accomplished by inserting the buffer between the recoil spring and the slide. Each time the action is worked or the weapon is fired the buffer comes into contact with the frame, not the metal slide. Installation of the Recoil Buffer will result in reduced felt recoil, enhanced muzzle control and a longer service life. The Recoil Buffer for Glocks will fit models 17, 17L, 18, 19, 20, 21, 22, 23, 24, 24C, 31 and 32.
BUY
PPSh41 / Semi SR41The Buffer Technologies PPSh-41 recoil buffer will fit on all original models as well as the new semi-auto version now being produced. The recoil buffer simply replaces the existing buffer, but the difference is that our buffer is made of a polyurethane material which can take thousands of rounds without breaking down or coming apart like the original.
BUY
Browning Hi-Power Recoil Buffer™The Browning Hi-Power is an undeniable classic. Taking good care of its action is essential if you want to ensure that your piece of the Browning legacy endures. However, every time you fire off a round the slide slams backward making contact with another piece of steel. Gradually this can cause the action to become loose! Fortunately, a Recoil Buffer™ can cushion this trauma and lengthen the service life of your favorite pistol.
BUY
Smith and Wesson Recoil BufferInstallation of the Smith and Wesson Recoil Buffer will result in reduced felt recoil, enhanced muzzle control and a longer service life. The Smith and Wesson Recoil Buffer will fit all center fire models of the third generation guns. This product will not work in the Sigma line of pistols.
BUY
Replaces the original factory unit. Made of a resilient, high-impact polyurethane. Allows the recoil spring to rest against the
rear support plate. Specify Model.
BUY
Produced with 21st Century materials to reduce recoil impulses. Eliminates the metal to metal contact of bolt to bolt stop pin.
BUY
1911
Auto Recoil Buffer
Will fit all 1911 Style automatic pistols, any caliber. Package of 8.
$9.95
BUY
AK/Valmet/Galil
Recoil Buffer
Fits all models of AK's, Mak-90's, Galil's, and Valmets.
$14.95
BUY
FN/FAL
- L1A1 Recoil Buffer
Buffer for all models including Para.
$14.95
BUY
HK
91/93 Recoil Buffer
Fits all full stock versions of the model HK 91 and 93.
$19.95
BUY
M1A/M14 Recoil
Buffer
Fits all models and variants of M1A and M-14 rifles.
$14.95
BUY
Mini-14 Recoil
Buffer
Fits all Ruger Mini-14 Series.
$14.95
BUY
SKS Recoil Buffer
Fits all Models of SKS, Chinese or Russian.
$9.95
BUY