Romanian MD63/MD65 Underfolder FlatsTop Rail Bent and Trimmed


These are made to work with the Romanian underfolder stocks and will not work with the Polish or Yugo sets. There is no need to buy a reinforcement plate for this receiver. Trunnion not included.

Receiver flat thickness= 1mm (.040")
Material 4130 Annealed
Comes with bolt guide rails
Rails and flat need to be heat treated after bending

Reccomended rivets and center support (not included with flat)

AKM Fixed Stock Rivet Set
1mm Center Support
To use these flats you will need to have a 5mm and 7mm reamer. The physics of bending sheet metal make it next to impossible to have a bend close to a hole without distorting. To solve this the holes on the flat are undersized and need to be reamed to size after bending. Look at the receiver flat instruction page to see more info.

The rails that will come with the flats are pictured below. They have mag stabilizers on both rails to keep the mag from tilting and causing feed problems. Before installing the rails you will need to trim the mag stabilizers to match the caliber of flat you are using.

Add to Cart:

  • Model: B2-21
  • Manufactured by: AK Builder

This product was added to our catalog on Monday 28 April, 2008.

Copyright © 2020 Grand Masters L.L.C..